Honda Shadow Bobber complet bobber set- rear fender-swing arm bag-solo seat

 The seat Pan is made in the house" from cold rolled steel, and is quite large for a normal size(36 cm wide or 14.7") , but for sure will unsure you a nice and comfortable ride.

Medium density foam,highly profiled in the back that will ensure a safe position, covered with genuine vegetable tanned cowhide leather, combined with fine Italian leather, diamond stitches, that will give the seat an classical manly look, and high contrast.

dimension: 34 x 39 cm or 13.38" x 15.3"

swing arm Bag is Made from Thick vegetable tanned cow leather, that gives an firm same time soft shape, 4 leather straps to install,hand dyed,hand forged buckle from stainless steel, TIG welded, simple plane shiny, easy polish

Dimension:H- 7,4"(19 cm) backed

H- 14.6"(37 cm) front

D- 4"(10 cm)

Hand formed rear fender from steel sheet metal for 16"

A complete set for any bobber

#sheetmetalwork #sheetmetalfab #metalshaping #sheetmetalshaping #soloseat #swingarm #motorcyclediaries #bobberseat #bobberstyle #saddle #hondabobber #hondashadowbobber #bobbers #leathersaddle #leatherseats #bobber #leatherseat #vegetabletannedleather

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup fenders

 Peugeot 203-1951, Custom pickup fenders

from start to finish

Time to move on to other project, stay tuned for more updates, more cool stuff to come.

#tigwelding #tigwelded #hotrods #welding #peugeot203custom #tigwelder #peugeot203 #customfenders #planishinghammer #sheetmetalshaping #hotrod #metalshaping #sheetmetalfab #sheetmetalwork #pegout #custompickup #custompickups

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup-backbone

 the" Backbone"- final touches for this monstrosity

#hotrod #sheetmetalshaping #peugeot203 #tigwelder #planishinghammer #tigwelded #peugeot203custom #custompickup #welding #tigweldingtips #customfenders #hotrods #tigwelding #sheetmetalwork #sheetmetalfab #metalshaping

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup- planishing

 Somehow I managed to bond together the second fender, clean up the welds and level'd. I used a hand held unit planishing hammer build in the house, low radius(100) for the back side and higher craw die(45) for the front... ready for the final weld.#tigwelding #tigwelded #peugeot203custom #tigweldingtips #hotrods #welding #customfenders #custompickup #sheetmetalshaping #hotrod #metalshaping #sheetmetalfab #sheetmetalwork

#planishing #planishinghammer #planishinghammerdies

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup- TIG welding

I have not worked with such large panels so far, for safety and for my peace of mind I left a space of at least 1 mm between the panels to avoid excessive expansions, deformation that could occur during the welding process and it worked.

T.I.G welding process, argon flow 2 l/ min, 2.6 mm thoriated Electrode , air cooled torched,.25-28 Amp

I'm glad I chose to weld them T.I.G and not oxy -gas. I will probably make a clip, focusing on the penetration of the back weld.

#sheetmetalfab #hotrod #metalshaping #sheetmetalwork #tigweldingtips #tigwelder #peugeot203custom #tigwelded #tigwelding

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup .5

 stage 5- completing the  fender spine" and patching here and there. as you can see, not only does widen but it also rises (at the bottom). another 200 hours and we were finishing the second fender.