Honda Shadow Bobber complet bobber set- rear fender-swing arm bag-solo seat

 The seat Pan is made in the house" from cold rolled steel, and is quite large for a normal size(36 cm wide or 14.7") , but for sure will unsure you a nice and comfortable ride.

Medium density foam,highly profiled in the back that will ensure a safe position, covered with genuine vegetable tanned cowhide leather, combined with fine Italian leather, diamond stitches, that will give the seat an classical manly look, and high contrast.

dimension: 34 x 39 cm or 13.38" x 15.3"

swing arm Bag is Made from Thick vegetable tanned cow leather, that gives an firm same time soft shape, 4 leather straps to install,hand dyed,hand forged buckle from stainless steel, TIG welded, simple plane shiny, easy polish

Dimension:H- 7,4"(19 cm) backed

H- 14.6"(37 cm) front

D- 4"(10 cm)

Hand formed rear fender from steel sheet metal for 16"

A complete set for any bobber

#sheetmetalwork #sheetmetalfab #metalshaping #sheetmetalshaping #soloseat #swingarm #motorcyclediaries #bobberseat #bobberstyle #saddle #hondabobber #hondashadowbobber #bobbers #leathersaddle #leatherseats #bobber #leatherseat #vegetabletannedleather

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup fenders

 Peugeot 203-1951, Custom pickup fenders

from start to finish

Time to move on to other project, stay tuned for more updates, more cool stuff to come.

#tigwelding #tigwelded #hotrods #welding #peugeot203custom #tigwelder #peugeot203 #customfenders #planishinghammer #sheetmetalshaping #hotrod #metalshaping #sheetmetalfab #sheetmetalwork #pegout #custompickup #custompickups

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup-backbone

 the" Backbone"- final touches for this monstrosity

#hotrod #sheetmetalshaping #peugeot203 #tigwelder #planishinghammer #tigwelded #peugeot203custom #custompickup #welding #tigweldingtips #customfenders #hotrods #tigwelding #sheetmetalwork #sheetmetalfab #metalshaping

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup- planishing

 Somehow I managed to bond together the second fender, clean up the welds and level'd. I used a hand held unit planishing hammer build in the house, low radius(100) for the back side and higher craw die(45) for the front... ready for the final weld.#tigwelding #tigwelded #peugeot203custom #tigweldingtips #hotrods #welding #customfenders #custompickup #sheetmetalshaping #hotrod #metalshaping #sheetmetalfab #sheetmetalwork

#planishing #planishinghammer #planishinghammerdies

Peugeot 203-1951, Peugeot Custom fenders -Peugeot custom pickup- TIG welding

I have not worked with such large panels so far, for safety and for my peace of mind I left a space of at least 1 mm between the panels to avoid excessive expansions, deformation that could occur during the welding process and it worked.

T.I.G welding process, argon flow 2 l/ min, 2.6 mm thoriated Electrode , air cooled torched,.25-28 Amp

I'm glad I chose to weld them T.I.G and not oxy -gas. I will probably make a clip, focusing on the penetration of the back weld.

#sheetmetalfab #hotrod #metalshaping #sheetmetalwork #tigweldingtips #tigwelder #peugeot203custom #tigwelded #tigwelding