marți, 20 ianuarie 2026

Caterpillar boots

 Un model de gheată  utilă ,cu linii ale croieli si  cusături mai moderne , un model inspirat după o pereche de ghete, bocanci personali CATERPILER 

caracteristici:

mărime :42 EU încape lejer si o șosetă🧦 groasă cit si branțuri mai groase din piele

EUUS
UK 👣 (cm)/ inch


429827 cm-10,6”

materiale:

exterior -Piele bovina ceruită, pull up maro roșcat, grosime de 2,2mm

Interior- piele bovina tăbăcită cu tanin vegetal  de 1,6mm

              - Branț (tălpică) din plută, piele tăbăcită vegetală, natur (nevopsită,)

Bombeu realizat manual prin hidro-formare din piele vegetala, la fel si armatura pentru călcâi.

 Talpa interioara de care este lipită fața interioară  cit si ceea intermediara de care este cusută gheata , sunt din  piele tăbăcită vegetal de 6 mm da! gheata este lipita si cusuta pe talpă.

Talpa exterioara personalizată,  realizată manual din  microporos alb stratificat, avantajele pe care le va oferii in timp, costul de reparație la uzura tălpi va fi cu mult redus deoarece se va putea înlocui unul respectiv doua straturi si nu toată talpa.

Totul cusut cu ață de 10(1-1,2mm)  manual.



A useful boot model with a modern lines and stitching pattern, inspired by a pair of  personal CATERPILER boots.


Features:

Size: 42 EU fits comfortably with thick socks and thick leather insoles(see photos)


EUUS
UK 👣 (cm)/ inch


429827 cm-10,6”

Materials:


Exterior - Waxed cowhide leather, reddish brown pull-up, 2.2 mm thick


Interior - 1.6 mm vegetable-tanned cowhide leather


- Cork insole, vegetable-tanned leather, natural (undyed)


Handmade hydroformed vegetable-tanned leather toe cap, as well as heel reinforcement.


The inner sole to which the inner lining is glued, as well as the midsole to which the boot is sewn, are made of 6 mm vegetable-tanned leather. Yes! The boot is glued and sewn to the sole, by hand.


Customized outer sole, handmade from white microporous laminate, offering long-term advantages: the cost of repairing sole wear will be greatly reduced because only one or two layers will need to be replaced, rather than the entire sole.



PRICE :240 EU or 250  US $











duminică, 18 ianuarie 2026

Bobber fender for HD EVO 1978 -SHINKO 5.00X 16" tire Hand Formed Steel Bobber front Fender: 3.00X 21" Tire, Harley Davidson EVO 1978

 

 


Hand formed steel fender 21" (55 cm)  long with a 1/4" ( 6mm) beaded edge, 3" (8cm) wide fits a SHINKO 3.00X 21" tire 

If it does not fit on your tire size, for other applications, contact us with a question, it can be made on any length, width, shape and radius of curvature, transverse(section)and longitudinal.

Apărătoare ,aripă din oțel confecționată manual, lungime de 55 cm, cu  margine bordurată de 6mm de jur împrejur la o lățime de 8cm care potrivește pe o  anvelopă SHINKO 3.00 X 21"

Dacă aceasta marime nu  potrivește pe dimensiunea anvelopei dvs, pentru alte aplicații, contactați-ne cu o întrebare, de obicei se poate  realiza pe orice lungime, lățime, formă cit și raze de curbura transversală si longitudinala diferite

price: 155 eur or 170 us$

World wide shiping